Welcome to visit BNTET Burner website!

NEWS

Blast furnace gas burners phenomenon and distinguish

Writer: admin Time:2022-01-11 00:00 Browse:

Blast furnace gas burner production process required oil heating, but the existing producer gas with water and a lot of tar, imported burner can not run. We find a lot of domestic manufacturers can not solve this problem. Then the blast furnace gas burner phenomenon and distinguish
	Blast furnace gas burners phenomenon and distinguish

Blast furnace gas burners phenomenon and distinguish
Application of high calorific value gas as combustion fuel combustion burner lit, the lit burner ignition combustion, the flame is prospecting for exploration into the burner fire, the valve opens the main gas pipe, the gas nozzle the gas injected into the combustion from multistrand flame tube, after vigorously mixing the combustion Qiangdian radial swirler with air, and then the axial, tangential to the small unit uniformly mixed air, as a flame-like jet stream into the furnace. Flame-tailed exploration is the exploration rush combustion flame and the main fire and found flames burning suspend promptly send a signal to the controller, close the gas valve, cut off the delivery of gas, blast furnace gas burners ensure flame. Gas generating furnace used for too long assumed that time, why would render the flames pause redness? Gas generating furnace used for too long assumed that time, when the flame will make the redness pause, the bottom of the furnace would appear black and so often found reason for this is because oil and dust fall within the furnace suspender holes, which , it is possible to pause is removed, use an old toothbrush to brush under the suspender holes around, then fine a lead wire of a poke, then tap a few times on the table, you can remove the debris, assuming pump, then blowing apertures are aligned one by one, the better. After clearing the suspension, a flame is still red assumed that dirt gets on the nozzle, can be removed suspender, the nozzle is exposed, stabbed with a few hard plastic brown silk or wool, and must not use copper, iron, etc. metal wire, to prevent the nozzle pores get hair, the effect of the use of impact nozzle and then, a suspension, a blue flame will, problem i.e., normal operations. Blast furnace gas burner principle of its operation, the burner can be a definition of a substance by a chemical reaction of the combustion of an apparatus for thermal energy conversion approach - rows premixed air and fuel mixture against the press apparatus so that the correct proportions its combustion. The burner is a fuel and air, according to the desired concentration, velocity, turbulence and mixing approach into the furnace, and the combustion of the fuel can be heat stable ignition device in the furnace. Fuel to oil and gas-based. General application in small and medium oil or gas boiler. Gas burner into natural gas burners, gas burners and other cities. Press burner combustion control approach distinguished: single-stage flame burners, two-stage fire burner, the burner proportional scheduler. Fuel atomization by way divided into: mechanical atomizer burners, a burner atomizing media;