Welcome to visit BNTET Burner website!

NEWS

Boiler burner apparatus and setting

Writer: admin Time:2021-11-23 00:00 Browse:

A combustor fuel and air mixture discharged in some manner (mixing or discharge) of the combustion apparatus collectively. In the current burner is very popular in the boiler combustion, because more energy-efficient and higher-power burners, with the view of setting equipment and boiler burner
	Boiler burner apparatus and setting

Boiler burner apparatus and setting
Hydraulic pump before entering the burner according to the technical parameters specifications. The burner pipe and out to be completely sealed, when the device is an oil pipeline, to avoid entry of foreign matter. The tubing into the water or foreign matter should be avoided, in the summer, the fuel tank should be filled with oil, to avoid condensation of water condensation. Clean oil tank cleaning before injection. An electrical input: confessed accordance with the manual power, ground to the burner. Do not confuse with the front line, do not touch the burner with wet hands. Do not pull the wire tight, to stay away from high temperature sources. Burner and boiler equipment set: to be close to the burner on the boiler, prior to combustion, boiler room should gain the approval of the competent, confession covered with water or thermal oil boiler, circulation valve is open, then the implementation of the following Action: the size of the burner's output is set according to the amount of fuel and the boiler output specification requirements. Throttle position to adjust the burners, the combustion head position. Confessed boiler manufacturers supply the boiler furnace pressure. The fuel gas emissions lower than the local varieties guaranteed specifications. Check the schedule and scheduling is useful not. Before departing, to ensure that all appropriate arrangements for orientation. By our professional operation, saving customers the cost of logistics service induction, advance the quality of service to customer satisfaction, and reasonable price the community has won the praise and attention. Repair and protect the boiler burner, now look together. Protection system of the burner comprises: explosion vent (boiler), heating system pressure protection, water protection, pressure protection, high pressure protection, low pressure protection, flame monitoring protection. When the burner practice, various protection signals are sent to the program controller, the respective program controller protection signal has been received, the signal is protected as long as all are normal, the ability to launch the burner. Sealing the gas line in the device process is now checked. In general, not detached. It takes disassembly, after re-connection line should be checked for air tightness. When the supply pressure is abnormal, the burner should be closed. When the gas pipeline of the filter is dirty, the closure valve of the piping, washing (or replace) the filter gas pipe. In front of the photosensitive surface of the photoelectric sensing section should be kept clean, remove the wiping Please observe.