Welcome to visit BNTET Burner website!

NEWS

Boiler burner manufacturer What?

Writer: admin Time:2021-11-19 00:00 Browse:

Among everyday use, and maintenance of the gas burner is certainly indispensable, it can be used as a fuel gas burner What? With the view of boiler burner manufacturer What?
	Boiler burner manufacturer What?

Boiler burner manufacturer What?
Basically when the boiler burner, we need to buy a burner, Zhengzhou Bona heat Equipment Co., Ltd. to provide customers with boiler burner program, boiler burner manufacturer What? Let's take a look at the Boiler Burner program: boiler burner manufacturer to introduce rehabilitation programs Burner: Burner canceled the original observation hole, an increase of coke oven gas channel in order to facilitate gas and air well mixed, the innermost and the outermost passage while the intake air. Burner combustion not completely stopped after transformation blast furnace gas, mainly as follows: First, the blast furnace gas burner divided into four layers, from the outside in order for the secondary air, coke oven gas, blast furnace gas, the secondary air. The blast furnace gas does not burn, the blast furnace gas regulating valve is closed, is formed in the blast furnace gas 0.9mx15m ducts (diameter 0.9m, the regulator valve to the gas burner nozzle 15m) of the dead zone, coke oven gas since the combustion in the furnace. in the burner outlet is formed slightly positive pressure, unburned co spreading to the damn area, easily carried over to the explosion limits, explosion. Second, the tail gas boiler blast furnace gas preheater, a flue gas boiler using high-temperature tail of the preheating furnace gas, blast furnace gas having a higher temperature when entering the furnace to improve the boiler efficiency. The blast furnace gas into the stop, the inner blast furnace gas does not flow heat exchanger, the preheater heating surface easily cause overheating damage, high temperature flue gas and waste of the waste heat boiler. Third, consider the company's supply and demand balance of blast furnace gas and coke oven gas, gas boiler must retain the ability to burn blast furnace gas, for adjusting the balance of the blast furnace gas pipe network. Blast furnace gas burner volute inner diameter large, need - in order to maintain a constant flow of blast furnace gas is not tempered by the lowest flow test Each burner blast furnace gas to 3000m / h, 12 Zhi burner totaling 12x3000m3 h = 36000m / h, Since a gas furnace gas regulating valve control system 3 burner, the burner tip holder 3000m / h, the flow rate of the other two burners will be higher than 3000m / h, so the operation of the boiler, the blast furnace gas flow rate as a minimum 50000m2 / h. If there is a need Boiler Burner, you can choose Zhengzhou Bona thermal Equipment Co. ①⑤⑥③⑨⑦⑧①⑧⑦⑥, the main products are gas burners, oil burners (diesel / light oil burner, heavy oil burner), dual fuel burners (diesel / gasoline or light oil, heavy oil or gasoline), a low nitrogen burners, rotary kiln burner, a multi-fuel burner, burner multichannel, asphalt mixing plant burner and boiler, stove, welcome the customer needs for product sales product-related technical advice.