Welcome to visit BNTET Burner website!

NEWS

What are the ways to solve the boiler burner

Writer: admin Time:2021-09-30 00:00 Browse:

The burner is a combustion device that is often used in the boiler or hot blast. It usually operates simple and convenient operation when the burner is used, and there are many applications. So what is the way to solve the boiler burner
	What are the ways to solve the boiler burner

What are the ways to solve the boiler burner
1. The fuel incinerator is divided into a heavy oil incinerator, a light oil incinerator. 2, low nitrogen burners are divided into gas varieties: liquefied gas incinerator, natural gas incinerator, coke oven gas incinerator, blast furnace gas incinerator, furnace (cold gas) gas incinerator, hot gas (cooler gas does not process Burning machine, chemical fire-fuser incinerator, biogas incinerator. 3. Oil and gas dual-use incinerator can incinerate an oil, and can incinerate a compound of gas. 4, pulverized coal incinerator supplies the pulverized air mixture (primary wind) of the pulverized coal preparation system and the secondary wind required for incineration to be injected into the furnace in the suspension state, respectively, in the suspension state. device of. 5. The concept of water coal slurry burner full-active boiler burner is equipped with a fan, active incinerator, flame detector, incineration program manipulator, fuel control conditioning equipment (such as solenoid valve, active conditioning valve) on the incinerator of the above varieties. Incineration air volume control conditioning equipment (such as active damper, damper conditioner), then forms an intelligent incineration system, which is called a full-active incinerator, such as a burning × × fuel called ×× all active incinerator. Method for preventing gas leakage: Gas leakage contains two aspects, and a gas leaking through a pipeline, and the second finger gas is leaked in the furnace of the electromagnetic valve core end. Environmental leaks may cause people to poison, and the work on site must be highly valued. First ensure the pipeline seal, the pipeline is detected, if the pipeline leakage must continue to use; second, it is necessary to prevent the gas concentration caused by poisoning and blasting, and requires the operation site ventilation and outstanding: equipment permanent ventilation and mandatory ventilation Equipment; other, require a job site to stop fireworks, electric parts explosion-proof. The furnace walks may cause blasting in the furnace. There are three ways to handle the leakage in the processing furnace: First, strengthen the pre-blow time and the amount of blowing amount, blow or dilute the furnace gas; Second, the gas pipeline is used in series structure, improves the system security; Leak detection equipment, detect gas pipelines before incineration, if the gas leakage reaches must be determined to determine the incinerator operation. When using winter, the oil storage equipment and the return oil pipeline system adopt an appropriate insulation method, and the oil protection is blocked by freezing. Together, the incinerator handling circuit portion must not be tidy or high. Please close the incinerator when cleaning the chimney. The motor should pay attention to moisture and prevent the use of moisture environments. The balance should be adhered to the balance when the burning machine is incinerated, and it is preferable to prevent skewing. When an inconvenience direct operation of the incinerator, the switch and the electrical protection equipment should be accepted. It is often checked whether the incinerator and the connection of the components are rugged, there is no looseness, and there is no change in orientation. When the incinerator starts, prevent the flames and destroyed things of the Outstanding in Outstanding. : Www.shumaboli.com