Welcome to visit BNTET Burner website!

NEWS

Flash Smelting Furnace Banner Technology Performance and Des

Writer: admin Time:2021-07-27 00:00 Browse:

The burner is collectively referred to as a device that causes fuel and air in a certain manner to mix (or mixed) combustion. At present, the burner is very popular on the boiler, because the burner is more energy saving and the power is higher, and the technical performance and design parameters of flash smelting furnace burner
	Flash Smelting Furnace Banner Technology Performance and Des

Flash Smelting Furnace Banner Technology Performance and Design Parameters
Flash Smelting Furnace (FSF) 1, Device Design Parameter L Quantity: 12 L Selection: -YJ-400CL Design Traffic: Maximum 500nm3 / H · Single Ratings 400nm3 / H · Single L Load Adjustment ratio: 1: 5L Natural gas pressure: 20kpa ~ 100kpal Fuwan pressure: 2000 ~ 3500pal flame length: ~ 5000mml ignition mode: artificial manual ignition 2, technical performance U burns complete, stable, high flame temperature, strong rigidity; U burns the mouth adjustment ratio, Can meet the compliance ratio (1: 5) U side burning flame in different conditions meet the process requirements (~ 5.00 m), the burner is not coking, black smoke phenomenon; U side burns in the furnace wall The inner diameter of the hole is within ф250mm, the burner spray mouth is 200mm from the inner wall surface of the resignation; the U-side burner has flame monitoring, external viewing, moving ignition, and the upper attachment of the upper attachment of the burner; u The flame diameter is ~ 1000mm, thickness 1000 ~ 1200mm; U-root burner has flame monitoring, external viewing, mobile ignition reservation