Writer： admin Time：2021-06-10 00:00 Browse：℃
Burners are commonly used in a boiler or stove burner, the burner operation is generally simple and convenient to use, there are many applications, the right operation of the burner Riello
The method of correct operation of the burner Riello
Process (a) how to safely Riello burner operation, power: 1. the new furnace apparatus, prior to commissioning in claim detecting whether gas should be carefully fit Riello burner; check air line and detecting whether the instrument duct valve opening and closing is normal, to facilitate future use and maintenance. 2. The pipeline of new devices, the sealing device should be carefully checked, and the reliability of all the line pipe. 3. The use of the user alone gasification station, to ensure gas supply, gas supply safety parameters fit the burning requirements. 4. The operator carefully read the instructions the use of equipment, knowledge and proficiency in the safe operation method. 5. Before each boot to check whether the gas valve to open, or Riello burner does not work. 6. The engine power control button in the control cabinet, this time on digital display which appears when the furnace temperature, the furnace temperature Xin mounted ambient temperature control button 7. The engine fan, blower means on the furnace body operation, if the fan case damage to the control cabinet automatically enter the next step without maintenance. 8. combustion air fan operation when there is no abnormality, then launch a combustion control button, then combustion process controller on the preliminary work, it must go through the procedure for combustion, air supply, fire detection, and other security programs eventually end burning. 9. The controller receives a signal when the combustion is not conducive to combustion (Example: a combustion failure, unstable pressure, the circuit in question) and other issues when, immediately shut off the gas burner control and an alarm signal. Combustion controller 10. If the alarm, the solution must be wrong by the operator to be able to continue its operations manual reset. 11. The operation of the entire apparatus, the operator should refer to the furnace safety procedures and operating production process. 12. The process requirements demand a temperature adjustment control, the operator should refer to the manual adjustment table intelligent CNC.
Add: No.33 Xinhua Road,Xinmi,Zhengzhou,China